All Products

Products Types Info

Type J Thermocouple

TypeJColorCode


Temperature Range

32 to 1382°F (0 to 750°C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Type J thermocouples are suitable for use in vacuum, in oxidising and reducing atmospheres or inert gas atmospheres. They are used for temperature measurements 760°C and below.

Type J Thermocouple Chart F
Type J Thermocouple Chart C

Request A Quote or Call Us Now

Type K Thermocouple

Type K Color Code

Temperature Range
–328 to 2282°F (–200 to 1250°C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Type K Thermocouples are the most common calibration for providing the widest operating range. Recommended for continuous oxidizing or inert atmospheres. Most commonly used for temperatures above 538°C. Not suitable for sulfur environments.

Type K Thermocouple Chart F
Type K Thermocouple Chart C

Request A Quote or Call Us Now

Type T Thermocouple

Type T Color Code

Temperature Range
-454 to 700F(-270 to 370C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Suitable in oxidizing, reducing, or inert atmospheres as well as vaccuum. Moisture resistant and very stable. This type is best suited for low temperature service. Because of its stability at lower temperatures, this is a superior thermocouple for a wide variety of applications in low and cryogenic

Type T Thermocouple Chart F
Type T Thermocouple Chart C

Request A Quote or Call Us Now

2-Wire RTD

Using the 2-wire method, the two wires that provide the RTD with its excitation current and the two wires across which the RTD voltage is measured are the same.

Request A Quote or Call Us Now

3-Wire RTD

Circuit

In a three wire RTD one of the wires is connected to one side of the temperature element and the remaining two wires are connected to the other side of the element.

Request A Quote or Call Us Now

4-Wire RTD

The optimum form of connection for RTDs is a four-wire circuit. It removes the error caused by mismatched resistance of the lead wires.

Request A Quote or Call Us Now

Platinum 100 RTD
PT100 sensors offer excellent accuracy over a wide temperature range (from -200 to +850 C).

The Pt1000 has 1000 ohms resistance at 0 C. These sensors are normally fitted into some type of protective sheath or mounting to form a probe.

Request A Quote or Call Us Now

Flanges

We are one of the leading manufacturers & exporters of threaded flanges, blind flanges, slip on flanges and more.

Request A Quote or Call Us Now

All

Products

Suggestions:

Some quick links to get you pointed in the right direction.

All

Products

THERMOCOUPLE-PLUG (3)

Suggestions:

Industries We Serve

Popular Thermocouples

Popular RTDs

Popular Bearing Sensors

Popular Thermowells

Popular Flanges

Popular Accessories

Type J Thermocouple

TypeJColorCode


Temperature Range

32 to 1382°F (0 to 750°C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Type J thermocouples are suitable for use in vacuum, in oxidising and reducing atmospheres or inert gas atmospheres. They are used for temperature measurements 760°C and below.

Type J Thermocouple Chart F
Type J Thermocouple Chart C

Request A Quote or Call Us Now

Type N Thermocouple

Type K Color Code

Temperature Range
–328 to 2282°F (–200 to 1250°C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Type K Thermocouples are the most common calibration for providing the widest operating range. Recommended for continuous oxidizing or inert atmospheres. Most commonly used for temperatures above 538°C. Not suitable for sulfur environments.

Type K Thermocouple Chart F
Type K Thermocouple Chart C

Request A Quote or Call Us Now

Type T Thermocouple

Type T Color Code

Temperature Range
-454 to 700F(-270 to 370C)

Accuracy
Standard Limits: ± 2.2°C or ± 0.75% Tol.
Special Limits: ± 1.1°C or ± 0.4% Tol.

Suitable in oxidizing, reducing, or inert atmospheres as well as vaccuum. Moisture resistant and very stable. This type is best suited for low temperature service. Because of its stability at lower temperatures, this is a superior thermocouple for a wide variety of applications in low and cryogenic

Type T Thermocouple Chart F
Type T Thermocouple Chart C

Request A Quote or Call Us Now

2-Wire RTD

Using the 2-wire method, the two wires that provide the RTD with its excitation current and the two wires across which the RTD voltage is measured are the same.

Request A Quote or Call Us Now

3-Wire RTD

Circuit

In a three wire RTD one of the wires is connected to one side of the temperature element and the remaining two wires are connected to the other side of the element.

Request A Quote or Call Us Now

4-Wire RTD

The optimum form of connection for RTDs is a four-wire circuit. It removes the error caused by mismatched resistance of the lead wires.

Request A Quote or Call Us Now

Platinum 100 RTD
PT100 sensors offer excellent accuracy over a wide temperature range (from -200 to +850 C).

The Pt1000 has 1000 ohms resistance at 0 C. These sensors are normally fitted into some type of protective sheath or mounting to form a probe.

Request A Quote or Call Us Now

Flanges

We are one of the leading manufacturers & exporters of threaded flanges, blind flanges, slip on flanges and more.

Request A Quote or Call Us Now

Industries We Serve

Technical Learning

Resistance Elements

Resistance Elements

Introduction Resistance elements come in many types conforming to different standards, capable of different temperature ranges, with various sizes and [...]

Read More
Temperature Transmitters

Temperature Transmitters

Temperature Transmitters General Overview Analog (4 – 20 mA) transmitters provide a number of benefits for use in industrial sensing.The [...]

Read More
Intro to Thermowells

Intro to Thermowells

Introduction to Thermowells Materials—The Longevity Factor- In general, the thermowell material to be chosen for an installation is governed mainly by [...]

Read More
3A Sanitary Temperature Measurement

Why is 3A Sanitary Temperature Measurement Important?

The following systems are dependent upon accurate temperature measurement: Pasteurization Systems include high temperature short time (HTST) at 105 degree’s [...]

Read More
Intro to Pipe Flanges

Intro to Pipe Flanges

Pipe flanges insure pipe and tube sections are sealed tight. Pipe flanges are American National Standards Institute (ANSI) rated for [...]

Read More
Flange Industries

Flange Industries

Flanges: • Threaded Flanges • Weld Neck Flanges • Slip On Flanges • Socket Welding Flanges • Blind Flanges Industries who use Flanges: Optimizing our in-depth industry experience and skilled workforce, [...]

Read More
Selecting A Wire

Selecting A Wire

GENERAL CONSIDERATIONS Vinyl offers low Cost, good flexibility, fair electricals, a good general purpose material. Irradiated PVC offers moderate cost, heat [...]

Read More
Weld Pad Temperature Sensors In Depth

Weld Pad Temperature Sensors In Depth

Thermometrics manufactures a full line of standard and custom weld pad RTD’s. The weld pad (tube skin) termination [...]

Read More

Technical Learning

Resistance Elements

Resistance Elements

Introduction Resistance elements come in many types conforming to different standards, capable of different temperature ranges, with various sizes and... read more

Temperature Transmitters

Temperature Transmitters

Temperature Transmitters General Overview Analog (4 – 20 mA) transmitters provide a number of benefits for use in industrial sensing.The... read more

Intro to Thermowells

Intro to Thermowells

Introduction to Thermowells Materials—The Longevity Factor- In general, the thermowell material to be chosen for an installation is governed mainly by... read more

Thermocouple & RTD Order Process

Here are just a few things we're looking for so we can manufacture the right temperature sensing solutions for you.

  • null

    Type K

    Thermocouple

  • null

    Type J

    Thermocouple

  • null

    Type T

    Thermocouple

  • null

    100Ohm RTD

  • null

    500Ohm RTD

  • null

    1000Ohm RTD

  • null

    304 Stainless Steel

  • null

    316 Stainless Steel

  • null

    310 Stainless Steel

  • null

    321 Stainless Steel

  • null

    Iconel

    600, 601, 800

  • null

    Hasteloy

    C-276, C-4

  • null

    Single

    Thermocouple

  • null

    Dual

    Thermocouple

  • null

    Multipoint

    Thermocouple

  • null

    Single

    2-Wire RTD

  • null

    D2

    2-Wire RTD

  • null

    Single or Dual

    3/4-Wire RTD

  • null

    .063

  • null

    .125

  • null

    .188

  • null

    .250

  • null

    .375

  • null

    TC's

    .010, .020, .040

  • null

    Grounded

    Thermocouple

  • null

    Un Grounded

    Thermocouple

  • null

    Exposed

    Thermocouple

  • null

    Alpha

    RTD

  • null

    SS Overbraid

  • null

    Flex Armor

  • null

    Rubber Sleeve

  • null

    Any

    In Inches

  • null

    PVC

  • null

    Teflon

  • null

    Fiberglass

  • null

    Kapton

  • null

    Bear Wire

  • null

    Ring Lugs

  • null

    Jack

  • null

    Plug

  • null

    Terminals

  • null

    Any

    In Inches

  • null

    Hex Fittings

  • null

    Compression

  • null

    Fluid Seals

  • null

    Configuration

  • null

    Detail

  • null

    Concept

  • null

    Components